Grass Valley FT Server - Manual (Page 69)

5. Manage connections as follows:
a) Disconnect the mouse from the USB port, if it is currently connected.
NOTE: A problem with Acronis 11.5 on the FT server requires this workaround. The
mouse must be temporarily disconnected before booting into Acronis, then reconnected
after Acronis fully loads.
b) If not already connected, connect keyboard and monitor.
6. Do the following:
a) Insert the Recovery CD.
b) Restart the machine.
If there is a problem restarting, hold the standby button down for five seconds to force a hard
shutdown. Then press the standby button again to startup.
The system boots from the Recovery CD.
The Acronis program loads.
7. Do the following:
a) Insert the Recovery CD.
b) Restart the machine.
If there is a problem restarting, hold the standby button down for five seconds to force a hard
shutdown. Then press the standby button again to startup.
The system boots from the Recovery CD.
The Acronis program loads.
8. On the Acronis Rescue Media page, do the following:
a) Use the keyboard arrow keys to select Acronis Backup and Recovery 11.5 (64-bit...) and then
press Enter .
b) Wait while Acronis fully loads.
This can take a few minutes. When loaded, the Acronis Backup and Recovery page opens
and displays a mouse cursor.
c) Connect the mouse to the USB port.
NOTE: A problem with Acronis 11.5 on the FT server requires this workaround. The mouse
must be temporarily disconnected before booting into Acronis, then reconnected after Acronis
fully loads.
9. On the Acronis Backup and Recovery page, select Back up now .
The Back up now page opens.
10. On the Back up now page, under What to back up, select Item to back up .
The Select item to back up dialog box opens.
11. On the Select item to back up dialog box, do the following:
a) Under Disk 1 select C and D . Clear other check boxes.
b) Click OK .
The Select item to back up dialog box closes.
12. On the Back up now page, under Where to back up, select Location .
The Select location back up dialog box opens.
20131220 FT Server Instruction Manual 69
Servicing the FT Server