Data disk dual configuration procedure – Grass Valley FT Server User Manual

Page 44

Text mode
Original mode

RDR Utility

Disk Access LED

Synchronization completed

N/A

Duplex

Green and blinking

Synchronization source disk

N/A

Duplex

Green and blinking

Synchronization destination
disk

None

Duplex

N/A

RDR Virtual disk

Data disk dual configuration procedure

NOTE: Read the Dual Disk Configuration Overview before performing this procedure.

Follow the procedure below to configure dual data disks for slots 1 to 7.

IMPORTANT: The following procedure describes how to configure the dual disk for Slot 1. To
configure the dual disks for Slot 2 to Slot 7, follow the same instructions for Slots 2-7 as Slot 1,
selecting the proper disk.

1. Insert a disk for the dual configuration into slot 1 of PCI Module 10. If a disk is already mounted,

this procedure is not necessary. Go to step 2.

FT Server Instruction Manual

20131220

Configuring the FT Server