Grass Valley FT Server User Manual
Page 43
6. Verify that disk synchronization has been started and the status of the DISK ACCESS LED and
RDR Utility display changes during synchronization as described in the table and RDR Utility
screen below:
RDR Utility
Disk Access LED
During synchronization
Status: N/A
Condition:
Simplex
Amber and blinking
Synchronization source disk
Status: N/A
Condition:
Syncing
Amber and blinking
Synchronization destination
disk
Status: Resync x %
(x=0, 4, 8,...96
Condition:
Simplex
N/A
RDR Virtual disk
IMPORTANT:
•
The time required for synchronization varies depending on the partition size on the disk. For
a 40GB partition, it takes about 50 minutes.
•
Setting dual disk configuration may not complete if you reboot the system during the
synchronization. Do not reboot the system before the synchronization process completes.
•
If the system stops by terminating Windows improperly such as pressing the
Power
button,
the whole disk area already synchronized will be resynchronized after rebooting the system.
Verify that disk synchronization is complete by noting that the status of the DISK ACCESS LED
and RDR Utility display change as described in the table and RDR Utility screen below:
RDR Utility
Disk Access LED
Synchronization completed
Status
Condition
20131220
FT Server Instruction Manual
43
Configuring the FT Server