Grass Valley FT Server - Manual (Page 51)

2. In the Set As Active RDR Plex dialog box, click OK .
Active RDR Plex can be viewed from Active RDR Plex of the RDR Virtual Disk. (In the image
below, the disk in slot 1 of PCI module 10 is set to Active RDR Plex among physical disks
constructing RDR Virtual Disk 2.)
Verify RDR virtual disk
To check whether the synchronization by RDR has been performed, use the following steps:
1. Start the RDR Utility and right-click on RDR Virtual Disk x in the left pane and click Verify RDR
Virtual Disk .
2. In the Verify RDR Virtual Disk dialog box, click OK . The progress of verification can be viewed
using the RDR Utility.
Verification completed Verifying
None Verify x percent (x=0, 4, 8, ...,
96) Status of RDR Virutal Disk x
Tips:
• The verification process is automatically performed every week.
• The time required for verification depends on the disk size and load. For a 73GB disk, it takes
about 90 minutes.
20131220 FT Server Instruction Manual 51
Configuring the FT Server