Grass Valley FT Server - Manual (Page 58)

12. Start a Command prompt to check the physical MAC address set on ipconfig/all.
Name teams
Before beginning this task, make sure of the following:
• Adapters are named
• The teams are created
1. Open Windows Network Connections.
2. Select adapter names in the “Device Name” column and rename them as follows:
• Local Area 5: Control Team
• Local Area 6: FTP Team
Reorder adapters
Before beginning this task, make sure of the following:
• Teams are created and named
1. Open Windows Network Connections.
2. Select Advanced , then Advanced Settings…
3. On the Adapters and Bindings tab, set the Control Team to be the first (top-most) connection and
the FTP Team to be the second connection.
4. Click OK to close and accept the changes.
5. Close Network Connections.
58 FT Server Instruction Manual 20131220
Configuring the FT Server