Rack types, Installing rack rail brackets in untapped rack – Grass Valley FT Server User Manual
Page 12
2. Lift off the accessory box and check for the contents listed below:
•
Assorted hardware for installing enclosure and side brackets
•
CD with OS software
•
Front bezel
•
Rack mount side brackets
3. Remove the 4RU enclosure with backplane and optical drive installed.
4. Remove the two identical CPU I/O modules.
5. Install the brackets and 4RU enclosure, then the CPU/IO modules and front bezel as described
in the installation instructions for these items.
Related Topics
on page 19
on page 23
on page 34
Rack types
The FT server can be installed in any of the standard 19 inch video or EIA racks listed below.
•
A standard 19 inch video rack with 0.281 round untapped holes with universal spacing requires
the installation of a front adapter flange and a front plate included in the accessory kit.
•
A standard 19 inch video rack with #10-32UNF tapped holes requires the installation of a front
adapter flange and a rear adapter flange included in the accessory kit.
•
A standard EIA IT rack with square holes uses threaded core nuts to attach the screws hold to
the unit in place. No adapters are required.
Procedures for all three types of rack mounting are described in this manual. Use the procedure that
matches your rack type.
Installing rack rail brackets in untapped rack
The FT server chassis requires 4RUs of space. Be sure to have another person help you to install
the chassis, do not attempt to install it alone.
You will need the following hardware from the accessory kit to install the rack rail brackets to
support the chassis in a untapped rack:
•
2 rack rail mounting brackets
•
2 front flange adapters (ADAPTER-FR)
•
2 plate adapters (PLATE)
•
8 panhead screws
•
4 washers
1. Locate the desired positioning of the FT server in the rack.
12
FT Server Instruction Manual
20131220
FT Server Installation Information