Grass Valley FT Server - Manual (Page 33)

Action Comments Representation Row LCD Message
Active Upgrade The message is
displayed on the
standby CPU/IO
module during
Split mode. DC ON Upper Split Mode
POST or OS Error behavior
If the POST or OS startup does not finish normally, the server will reboot itself automatically.
At the time of reboot, it will select the other CPU/IO module and run POST or OS startup.
In this manner, the server retries POST or OS startup with different combinations of CPU/IO modules.
If POST does not finish normally with any combinations, the server will stop with the state of DC
OFF or POST end with an error message displayed.
While performing retries, the server displays or registers the error types.
Front panel LEDs
On the right side of the front of the unit are four LEDs that show the current system conditions.
System Power LED
System Fault LED
System FT LED
ID LED
The LED meanings are shown in the table below.
Description Function LED Name
Green: System DC ON.
OFF: System DC OFF or AC OFF.
Indicates Power condition of
system. System Power
LED
20131220 FT Server Instruction Manual 33
FT Server Installation Information