Grass Valley FT Server - Manual (Page 32)

The POST running LCD format is shown in the table below.
F E D C B A 9 8 7 6 5 4 3 2 1 0
Z Z Z Z S O I B X X X X 0
1
The POST running LCD format detail is shown in the table below.
Description Display
Normal: Currently executing POST code XXXX
BIOS Build Number ZZZZ
The message displays the state of duplication on the upper row of LCD by software driver after the
OS boots.
The Boot message for the Virtual LCD is shown in the table below.
Action Comments Representation Row LCD Message
The module
displayed LCD
is broken.
Change the
broken CPU/IO
module.
If CPU part is
broken, LCD is
displayed on the
broken CPU/IO
modules. DC ON Upper CPU broken
The module
displayed LCD
is broken.
Change the
broken CPU/IO
module or PCI
card.
If IO part is
broken, LCD is
displayed on the
broken CPU/IO
modules. DC ON Upper I/O broken
System duplex
completed. When the
system is under
duplex mode,
the message is
displayed on
both CPU/IO
modules. DC ON Upper System Duplex
The system is
working under
simplex mode. When system is
not under
duplex mode,
the message is
displayed on the
CPU/IO module
working
normally. DC ON Upper System Simplex
32 FT Server Instruction Manual 20131220
FT Server Installation Information