Grass Valley FT Server - Manual (Page 14)

4. Now attach the rear of each rack rail bracket to the left and right rear sides of the rack using the
4 remaining panhead screws and washers. No adapters are necessary for this step.
5. Now go to the instructions for installing the FT server chassis.
Installing rack rail brackets in tapped rack
The FT server chassis requires 4RUs of space. Be sure to have another person help you to install
the chassis, do not attempt to install it alone.
You will need the following hardware from the accessory kit to install the rack rail brackets to
support the chassis in a tapped rack:
• 2 rack rail mounting brackets
• 2 front flange adapters (ADAPTER-FL)
• 2 rear flange adapters (ADAPTER-R)
• 8 panhead screws
• 4 panhead washers
1. Locate the desired positioning of the FT server in the rack.
14 FT Server Instruction Manual 20131220
FT Server Installation Information