Grass Valley FT Server - Manual (Page 19)

6. Install a core nut from inside of the rack. Hook either of the clips of the core nut to a square hole
of the rack. then hook the other clip to a hole by a flat-blade screwdriver.
7. Now go to the procedure for installing the FT server chassis.
Temperature requirements for rack installation
The FT server requires good ventilation and proper airflow to operate properly. Make sure you meet
the temperature airflow and humidity requirements listed below before installing the FT server in
the rack.
• The operating temperature of the FT server is from 10 degrees C (50 degrees F) to 35 degrees
C (95 degrees F). Please take adequate precautions and measures for maintaining the proper
airflow inside the rack as well as in the room so that the internal temperature can be kept within
this range during operation.
• The recommended operating room temperature range is between 15 degrees C (59 degrees F)
and 25 degrees C (77 degrees F).
• Optimum humidity for proper operation should be kept between 20 and 80%.
• Use only the rack installation instructions given in this manual to install the unit and other
components as recommended to avoid overheating conditions.
Install chassis in rack
Once you have installed the rack mounting brackets, install the FT server empty chassis enclosure
in the rack.
20131220 FT Server Instruction Manual 19
FT Server Installation Information