Grass Valley FT Server - Manual (Page 57)

7. Click Finish .
8. Open the Modify Team dialog box as follows:
a) In Device Manager | Network Adapters , right-click Control Team and select Properties .
The Properties dialog box opens.
b) Select the Settings tab.
c) Click Modify Team .
A dialog box opens.
9. On the Adapters tab, do the following:
a) Select the adapter in the team that corresponds to port the top CPU/IO module, and click Set
Primary .
b) Select the other adapter in the team and click Set Secondary .
10. Click OK and OK to close dialog boxes.
11. Repeat steps to create another team as follows:
• Name the team FTP Team .
• Team the adapters that correspond to the two right-hand ports (when facing the rear panel) .
• Make primary and secondary.
20131220 FT Server Instruction Manual 57
Configuring the FT Server