Grass Valley Branding Panel - Manual (Page 72)

RCP-BR: Guide to Installation and Operation
Page 64 Miranda Technologies Inc.
4.3.1 Network setup
The network of the RCP-BR panel can be setup to either obtain its network
settings automatically via DHCP or to manually enter a static IP address. The
interface for modifying the network settings is shown in figure 4-15.
Figure 4-15 Network setup
By default the RCP-BR panel comes with DHCP enabled. To change this select
the ‘Static’ radio button and then enter the IP Address, Subnet Mask and Default
Gateway. Having carried out the appropriate changes press the ‘Apply’ button to
update the network on the RCP-BR panel. It is not necessary to restart the RCP-
BR panel for these settings to come into effect.