Grass Valley Branding Panel - Manual (Page 26)

RCP-BR: Guide to Installation and Operation
Page 18 Miranda Technologies Inc.
By default, a channel with one Imagestore will be created (IS1). If you will
require a channel with an Intuition in the configuration then the ‘Add device
column’ option should be selected and the Intuition option should be selected.
The devices from the device area of the station configuration can then be dragged
to the required channel. A + sign will be displayed when the device being
dragged is over a device column in a channel and the device can then be dropped
into the column. An Imagestore, DSK or LGK can only be dropped into an
Imagestore column and an Intuition can only be dropped into an Intuition column.
The device in the device area will then be greyed out to indicate that it is in use by
a channel. A device can only be assigned to one channel, so if it is required by
another channel then it must first be removed from the channel using it. This can
be done by right clicking on the device in the channel.
A typical configuration is shown in figure 2-20.
Under the column ‘Group’ you can optionally type in the type of channel that the
new channel is. On the RCP-BR panel if all channels are left as Default all
channels will be shown in one view on the channel selector. This works well if
there are not many channels, but if you want to show groups of channels together
then entering a Group name will separate the channels in the channel selector into
their appropriate groups. An example of Groups is to create three groups - News,
Sport & Default.
Save option
Figure 2-20 Typical setup of station configuration