Grass Valley Branding Panel - Manual (Page 51)

RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc. Page 43
3.8 Audio
The Audio panel is displayed when the ‘Audio’ button is pressed or the audio
meters are pressed on the touchscreen in the main panel. This Audio button will
only be available if the device in the channel is an Imagestore. The audio panel is
shown in figure 3-22.
Figure 3-22 RCP audio output control
To modify the audio output level the top left rotary control can be used to increase
or decrease the gain from -99.5 to +28.0dB. The current audio levels on the
preview and programme outputs of the Imagestore are shown in the audio meters.
Rotate to
change output
gain.