Grass Valley Branding Panel - Manual (Page 38)

RCP-BR: Guide to Installation and Operation
Page 30 Miranda Technologies Inc.
3.5.1 Cutting a keyer up or down
The RCP-BR panel utilises an arm and take mechanism for cutting keyers up or
down. This means that multiple events can be triggered simultaneously. To arm
a keyer press the keyer button on the middle button bar. The current arm state for
the keyer is indicated in the LCD region directly above the keyer button. See
figure 3-9.
Press these buttons to arm
the appropriate keyer.
Figure 3-9 Keyer buttons with arm state indication
If the area on the LCD is lit as amber this indicates that the keyer is armed to
either cut or fade up or down. Pressing the keyer button will follow the sequence:
1. Arm cut up/down
2. Arm fade up/down
3. Disarm keyer