Grass Valley Branding Panel - Manual (Page 28)

RCP-BR: Guide to Installation and Operation
Page 20 Miranda Technologies Inc.
3 Using the RCP-BR panel
3.1 Turning on the unit
To turn on the unit ensure that the mains supply to the RCP-BR panel power
connector is not connected. Insert the power supply connector into the unit and
then apply mains to the power connector. The LCD on the RCP-BR panel should
initially be off; the LEDs on the bar at the bottom of the unit should gradually
turn on to indicate the progress of the unit’s initialisation. Shortly after the
progress bar has reached the right hand side, the LCD display will turn on
showing the channel selector view.
3.2 Turning off the unit
It is essential that the unit is turned off correctly. To shut down the unit go into
the System panel by selecting the System button on the top bar. This will open
the System panel as shown in figure 3-1.
Figure 3-1 System panel
On the touchscreen press the ‘Shut Down’ button and the panel will change to
display two new buttons – ‘Confirm Shut Down’ and ‘Cancel’. To continue
shutting down the unit press the confirm option. The panels will all close down
and soon after the LCD will turn off, and the bottom bar will show a progress bar