Grass Valley Branding Panel - Manual (Page 48)

RCP-BR: Guide to Installation and Operation
Page 40 Miranda Technologies Inc.
3.7 Modifying media in a keyer
The following modifications can be made to media in a keyer:
1. Position.
2. Cropping.
3. Clip, gain and transparency.
To modify the media select the button above the ‘Setup’ label in the media
browser panel. This will open the Setup panel which allows the positioning of
media.
3.7.1 Adjusting media position
The media in a keyer can be repositioned horizontally and vertically. Having
selected the ‘Setup’ option in the Media panel, the panel shown in figure 3-19 will
be displayed.
Figure 3-19 Adjusting media positioning
To adjust the horizontal position of the media in a keyer, rotate the top left rotary
control. This will adjust the horizontal positioning of the media in two pixel steps.
To adjust the vertical position of the media in the keyer, rotate the bottom left
rotary control. This will adjust the vertical positioning of the media in two line
steps.
The position of the media is previewed in the preview screen in the middle of the
panel.