Grass Valley Branding Panel - Manual (Page 11)

RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc. Page 3
2.2 Network configuration
The RCP-BR panel comes pre-configured to use DHCP to automatically
configure its networking. If a static IP address is required for the unit then a USB
keyboard and mouse should be added to the unit. The unit should be powered up.
Once the unit has started up and the channel selector dialogue is displayed the
ALT + Tab keys should be pressed on the keyboard, this will display the dialogue
as shown in figure 2-2. On the touchscreen press the button marked as Web.
This will display the web log-in screen as shown in figure 2-3.
Figure 2-2 Dialogue to select web interface