Grass Valley Branding Panel - Manual (Page 49)

RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc. Page 41
The position adjustment of the media is retained whilst the media is loaded in the
keyer. If the media is reloaded into the keyer this positioning information will be
lost. If it is required to retain the positioning information then the ‘Save Changes’
button must be pressed. This will permanently save the positioning information
with the media so if it is subsequently reloaded into a keyer, the position
information will be reused. Please note that selecting the ‘Save Changes’ button
will also save any changes made to the media cropping or clip, gain and
transparency.
3.7.2 Adjusting the media cropping
To adjust the media cropping select the button above the ‘Crop’ label in the media
Setup panel. This will open the cropping panel as shown in figure 3-20.
Figure 3-20 Adjusting the media cropping
The cropping of the media can be adjusted using all of the rotary controls on the
RCP-BR panel. As the cropping is adjusted using these controls, the extent of the
cropping on the media will be shown in the preview screen in the middle of the
panel. The cropping area will be displayed with a diagonal hatching and the
colour of the media is inverted.
The media cropping in this panel is retained as long as the media is loaded into
the keyer. If the media is reloaded any cropping information will be lost. If the
cropping information is required to be retained when the media is loaded in the
future, the ‘Save Changes’ button must be pressed. Please note that selecting this