Grass Valley Branding Panel - Manual (Page 32)

RCP-BR: Guide to Installation and Operation
Page 24 Miranda Technologies Inc.
3.4 Selecting a channel
On start-up or when the CH SEL button is pressed the channel select panel will be
displayed. An example of the panel is shown in figure 3-3.
Figure 3-3 Channel selection panel
The buttons showing Default, Sports and News are groups of channels. This is
set up in the station configuration where channels can be optionally assigned
groups. Selecting the appropriate group button will show only those channels
assigned to the group.
This warning icon which is shown for some channels indicates that there is
a connection error to one of the devices on the channel. As soon as this
connection error is resolved this icon will be automatically removed. A
connection error will be caused by such issues as loss of network communications
to the device, the unit being turned off or restarting.
If there are more than 8 channels in a group the channels can be scrolled up or
down using the scroll up/down buttons at the right hand edge of the panel.
3.4.1 Channel ganging
It is possible to gang two or more channels together. Whenever channels are
ganged any operations carried out on the panel will be sent to all ganged channels.
In this way it is possible to carry out simultaneous actions such as keyer control