Grass Valley Branding Panel - Manual (Page 10)

RCP-BR: Guide to Installation and Operation
Page 2 Miranda Technologies Inc.
2 Setting up of the RCP-BR panel
Before using the RCP-BR panel to control a system, two things will need to be
setup, these are:
1. The networking configuration.
2. The station configuration which defines which devices the panel will
control and the configuration of these devices into channels .
2.1 Connecting up the panel
Please refer to figure 2-1 for a picture of the rear of the RCP-BR panel. For
normal usage an Ethernet cable must be inserted with a connection to the network
that the devices to be controlled are on. In addition there is an earth stud for
earthing the unit.
Earth stud DC Power GPI USB Ethernet
Figure 2-1 Main Rear connections for the RCP-BR panel
To power up the unit connect the remote power adapter to the power socket on the
RCP-BR panel before the power adapter is connected to the mains supply.