Grass Valley Branding Panel - Manual (Page 25)

RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc. Page 17
Figure 2-18 Configuration for a new device
Having defined all the devices that are to be controlled by the RCP-BR panel it is
then necessary to setup the channels on the device, and for each channel assigned
in the configuration the appropriate devices should be assigned to the channel.
Firstly a new channel should be created in the station configuration. To do this
right click in the channel section of the Station Manager and select the ‘Add
channel’ option as shown in figure 2-19.
Figure 2-19 Adding a channel to the station configuration