Grass Valley Branding Panel - Manual (Page 15)

RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc. Page 7
2.3 Station configuration
Before starting to use the RCP-BR panel the station configuration for the unit
must be setup. The station configuration defines those devices on the network
which the panel should control; these devices could be any of the following:
•
Imagestore 300
• Imagestore HD
•
Imagestore 750
•
LGK-3901
•
DSK-3901
• Intuition
•
Intuition+
•
Intuition XG ( supported in future )
These devices then need to be assigned to a channel. A channel can consist of one
of the following combinations:
1. One ImageStore, LGK-3901 or DSK-3901
2. One Intuition, Intuition+ or Intuition XG
3. One ImageStore, LGK-3901 or DSK-3901 with one Intuition, Intuition+
or Intuition XG
For information on other Miranda devices not in this list please contact Miranda.
The RCP-BR continually monitors all channels in its station configuration for
device status. Increasing the number of channels can slow down RCP-BR
operation. Miranda recommends a maximum of 20 channels / 30 devices.
Note: To ensure correct operation of the RCP-BR panel appropriate software
versions need to be installed on all controlled devices. The minimum
recommended versions are:
Imagestore 300, Imagestore HD, Intuition, Intuition+
1.13.8.1
Imagestore 750 2.0.2 or 3.1
LGK-3901, DSK-3901 2.1.3 or 3.0