Grass Valley Branding Panel - Manual (Page 31)

RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc. Page 23
3.3.1 Panel Lock button
When the Panel Lock button is pressed, the button will light up red and in this
mode all the buttons on the panel and the touchscreen are disabled until this mode
is deselected.
3.3.2 Channel Select
When the RCP-BR panel starts up or when the channel select button is pressed
the channel selection panel is displayed. This panel allows the operator to select a
channel or to gang channels together. This functionality is discussed in detail in
section 3.4.
3.3.3 DSK Off
If a channel is selected then pressing this button will cut all Imagestore and
Intuition keyers down immediately. This will bypass any arm and take setup.
3.3.4 Take
If a channel is selected and a DSK, VO or macro are armed, this button will flash
to indicate that a function is armed. In this situation pressing the Take button will
action all armed events.