Grass Valley Branding Panel - Manual (Page 57)

RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc. Page 49
3.10 Alarms
Pressing the ‘Alarms’ button in the System panel will display the Alarms panel.
Figure 3-29 Alarms panel
The panel shows the device alarms for the Imagestore, LGK or DSK device for
the current channel. If multiple channels are ganged, then the alarms for the
master channel are shown (see section on Channel ganging for more details). If
the current channel only has an Intuition-type device, then no alarms will be
shown because Intuitions currently do not provide any alarm information. If any
of the device readings fall outside the expected range then a red LED will
highlight the potential problem. An alarm can be turned on or off by toggling the
On button within the appropriate alarm box.