Grass Valley Aurora Ingest v.7.0.0 - Manual (Page 96)

The setup is within the Video Viewer tab of the Scheduler Options dialog box.
1. Select the Video Viewer tab.
2. Check the Enable Video Viewer box to have a video viewer in your Scheduler
application. This feature enables user to view the asset as it is ingested into the
media server.
3. If desired, check the 16:9 video format.
4. If using a router, select the router destination from the drop-down list. If no router
has been configured, this field will be grayed out.
5. If you have installed a video capture card, select the device in the Video Display
Device drop-down list.
6. Select No Capture Device if you want to view the asset via a separate video monitor.
7. Once the Hauppauge WinTV video capture card or Blackmagic Design DeckLink
video capture card is configured for the video viewer, it could also be utilized for
the high resolution asset viewer.
8. The High Resolution Asset Viewer enables users to view ingested asset in the
media server and edit assets with Mark In/Out points via the asset viewer controls.
To enable the feature, check the
Enable Asset Preview Window box in that section.
96 Aurora Ingest System Guide 14 April 2010
Configuring Aurora Ingest