Grass Valley Aurora Ingest v.7.0.0 - Manual (Page 77)

The setup wizard will install the software.
9. Click Finish after the installation is done.
NOTE: Once you have configured the virtual COM port, it will be available
in the COM Port drop down list on the router configuration window of Aurora
Ingest - Server.
10. To avoid unnecessary timeouts on RS422 communication, you need to set the Digi
One SP optimization routine to Latency.
This can be done by launching the configuration page on your web browser. If
needed, the default username/password for the Digi One configuration page is
root/dbps.
11. Then, go to the System Configuration page and select Latency from the Optimization
dropdown list.
14 April 2010 Aurora Ingest System Guide 77
Configuring Aurora Ingest