Grass Valley Aurora Ingest v.7.0.0 - Manual (Page 48)

• SiteConfig is able to log in to the device using the username/password credentials
assigned to the device.
• The SiteConfig control point PC does not have a network drive mapped to an
administrative share (such as C$) on a device on which you are checking software.
• If Aurora product software at a version lower than 6.5.2 is currently installed, it
must be manually uninstalled. For more information refer to SiteConfig Migration
Instructions.
• If upgrading from Aurora Ingest 6.5.2, add the GVG MLib role to Aurora Ingest
Server device as the previously added device does not have the GVG MLib role.
Do the following steps on the devices that you are upgrading.
1. In the Software Deployment | Deployment Groups tree view, right-click the top-most
node for the group or any individual device and select Check Software .
NOTE: If you have access problems, verify that the adminstrator account on
the device has credentials as currently configured in SiteConfig. By default
credentials on the device should be administrator/adminGV! for Aurora devices
and Administrator/adminK2 for K2 devices.
The Check Software dialog box appears. SiteConfig searches for software on
the selected device or devices and gathers information. Progress is reported.
2. When the check is complete for the selected device or devices, close the Check
Software dialog box.
An updated list of all currently installed software is displayed in the Software
Deployment | Devices | Installed Software list view. If software is a SiteConfig managed
software package, information is displayed in the Managed Package and Deployment
Group columns.
Add software package to deployment group for Aurora Ingest
devices
Prerequisites for this task are as follows:
• You can access the software package file from the SiteConfig control point PC.
• The Aurora Ingest devices to which you are deploying software are in a deployment
group.
Use the following procedure to add one or more software packages to the deployment
group that contains your Aurora Ingest devices. For this release of software, identify
and add software installation files as follows:
File name Software
AuroraIngest_7.0.x.xxxx.cab Aurora Ingest software – For all Aurora
Ingest devices
GVG_MLib_3.3.x.cab or
GVG_MLib_7.1.x.cab
GVG MLib software – For Aurora Ingest
Server and RMI
48 Aurora Ingest System Guide 14 April 2010
Managing Software