Configuring encore – Grass Valley Aurora Ingest v.7.0.0 User Manual
Page 69

Select 0 (zero) for the video level if video is the first level in your router control
system, 1 if it is the second level and so on.
6. The RS422 switching is available for SMS7000, but not the Acappella or Jupiter
routers. You can select the port level from the dropdown list. This feature enables
you to switch between VTRs for each channel without having to swap the RS422
cables manually, as Aurora Ingest will switch the RS422 port.
Aurora Ingest switches video from the VTR to the video capture card whether
RS422 switching is enabled or not.
7. Click
Configure Router Sources
to configure router sources that are going to be
used with Aurora Ingest clients.
8. Click
Apply
to save changes.
Configuring Encore
Encore system can be configured to control the crosspoints of a single routing matrix,
or expanded to control multiple matrices depending on your system needs.
14 April 2010
Aurora Ingest System Guide
69
Configuring Aurora Ingest