Grass Valley Aurora Ingest v.7.0.0 - Manual (Page 183)

Description Column
Any error messages describing why the clip was not recorded to the server. Error
Message
Indicate whether handles have been added to the clip. Use Handles
The identification of the particular tape Tape ID
Recording with VTR Ingest
You can use VTR Ingest to create a segment (batch) list of clips from videotape
recordings, which you then record to your media server.
1. Decide if you want to add handles to your clips.
2. Create a segment list or import an EDL.
3. Record the segment list to your media server.
Adding Handles
If you add handles to your clips, you will have additional frames to choose from when
trimming your clips. Grass Valley recommends handles to be used.
• Click the Record Handle button .
Handles will automatically be added to your clip.
You can set the duration of the handles on the VTR tab of Aurora Ingest Server configuration
options.
Creating a segment list
You can create a segment (or batch) list using VTR Ingest.
1. Insert a tape into the VTR.
2. Click the Tape ID button .
If you don’t enter a Tape ID and you already checked the Prompt for Tape ID
box within VTR Ingest configuration, Aurora Ingest prompts you before you
add the first clip. The Tape Properties dialog box displays on the screen.
14 April 2010 Aurora Ingest System Guide 183
Using Aurora Ingest - VTR Ingest