Grass Valley Aurora Ingest v.7.0.0 - Manual (Page 64)

Description Setting
Enter the IP address or name of the computer that is hosting
the ScheduALL Server. If you need to configure the web ScheduALL Server
(optional)
service, edit resources or synchronize events, you can click the
Configure button.
If your system uses NetCentral to monitor equipment, enter its
name or IP address. NetCentral Server
If you are using a CompuSat satellite dish control system, enter
the location where the CompuSat application is running. CompuSat
Enter the name of the server where the license is located. License Server
Select the video reference standard used
in your operation. NTSC drop
frame; NTSC
non-drop; PAL Reference
Standard
Click the check box if you want to enable the option to switch
video aspect ratio of feeds and VTR ingests. This feature is Enable option to
switch aspect ratio
currently supported for SD K2 media client version 3.2 and
above only.
Select the default aspect ratio for your
ingest operation. 16:9; 4:3 Default aspect
ratio
Setting up the K2, K2 Summit or M-Series iVDR server
You need to configure your media server to work with Aurora Ingest.
1. See your K2 / K2 Summit / M-Series documentation and set up the record channels
to use Advanced Media Protocol (AMP).
2. In Aurora Ingest, configure media servers and channels to use Internal, Time of
Day, LTC or VITC timecode mode.
For LTC or VITC timecode, connect your desired timecode source to the
timecode input on your media server.
Configuring Media Servers
You can configure which media servers will be used for Aurora Ingest recordings.
Once media servers are configured, select bins that will be used when recording clips
and feeds.
64 Aurora Ingest System Guide 14 April 2010
Configuring Aurora Ingest