Grass Valley Aurora Ingest v.7.0.0 - Manual (Page 28)

The group appears in the tree view.
2. Right-click the group and select Rename .
3. Enter the desired name for the group.
Adding a device to the system description
Prerequisites for this task are as follows:
• The system description contains a group.
1. In the Network Configuration | Devices tree view, right-click a group and select Add
Device .
The Add Device dialog box opens.
2. Configure settings for the device you are adding as follows:
• Family – Select Aurora .
• Type – Select Aurora Ingest Platform .
• Model – Select the appropriate Aurora Ingest components.
• Name – This is the device name, as displayed in the SiteConfig device tree view
and device list view. This name can be different than the host name (network
name). You can accept the default name or enter a name of your choice. Devices
in the tree view are sorted alphabetically.
• Amount – You can add multiple devices, as currently defined by your settings
in the Add Device dialog box. An enumerator is added to the name to create a
unique name for each device added.
• Control network – Select the control network.
28 Aurora Ingest System Guide 14 April 2010
Configuring the network