Grass Valley Aurora Ingest v.7.0.0 - Manual (Page 89)

1. In Aurora Ingest - Scheduler, select Tools | Options .
The Scheduler options properties window displays.
2. On the System tab, specify the Aurora Ingest Server for your operation. If you want
to use an Aurora Ingest Server that is hosted on another machine, you need to
specify the server name here.
3. In the Options section, you can select to show a secondary timeline on the Aurora
Ingest - Scheduler main window.
This feature allows you to display dual time zones on the Scheduler application,
which is of great use for global operations.
4. Select the time zone that you need from the dropdown list for your secondary
timeline.
Once configured, Scheduler will display both primary and secondary clock and
timelines on the main window.
5. You can also set a default start time for a newly added event. The default start time
ranges from 30 seconds to the next hour on the drop-down list.
The default start time that you set will appear in the Add Event dialog box.
NOTE: If you set the default start time to 10 minutes and click the Add Event
button at 11.10 am, the default start time in the Add Event window will be set
to 11.21 am after allowing 10 minutes default between adding and recording
14 April 2010 Aurora Ingest System Guide 89
Configuring Aurora Ingest