Grass Valley Aurora Ingest v.7.0.0 - Manual (Page 60)

Configuring Aurora Ingest
Once you have installed any hardware (if necessary) and the software components of
Aurora Ingest, you need to configure the Aurora Ingest options for your particular
newsroom equipment and workflow.
You can add and configure VTRs with the VTR Controller and VTR Ingest
applications. Scheduler, RMI Standalone and RMI clients are configured within their
respective applications. All other configurations can be set in the Aurora Ingest Server.
Aurora Ingest - Server overview
The Aurora Ingest - Server user interface shows the status of the system components
and channels, as well as the system logs. The server machine name might be truncated,
however the full name is visible if you hover your mouse over the area.
Additional information regarding a channel can also be obtained if you hover on the
channel name. These information include channel name, server name, recording port,
remaining storage and status of the channel.
• A green indicator—the component or channel is connected.
• A red indicator—the component or channel is not connected.
• A grayed-out indicator—the component is not configured.
60 Aurora Ingest System Guide 14 April 2010
Configuring Aurora Ingest