Grass Valley Aurora Ingest v.7.0.0 - Manual (Page 23)

2. For Hauppage WinTV-HVR-1150 video capture card, connect the device you're
using for a video source (VTR, router or switch box) to the Hauppage composite
video input connector.
3. For Blackmagic Design DeckLink video capture card, connect SDI Output from
your media server or router to SDI Input connector of the video capture card.
4. If you have a video capture card installed in your machine and a router configured
in your system, select the router destination from the dropdown list within
Tools|Options|Video Viewer of the Scheduler or VTR Ingest.
After the video capture card has been successfully configured, it could be selected
from the Capture Device dropdown list within
Tools|Options|Video Viewer of the
Scheduler or VTR Ingest.
Installing the X-keys Jog/Shuttle Controller
You can install the X-keys Jog/Shuttle controller if you want to use the device with
Aurora Ingest Scheduler.
Aurora Ingest has been designed to work with the X-keys Jog/Shuttle controller (model
XPS-08-USB) with MWII panels.
1. Plug the X-keys Jog/Shuttle controller into a USB connector on the Scheduler
machine.
2. On the Scheduler machine, insert the X-keys Macro Works installation CD and
follow the instructions. Do not check the box to put shortcuts on the desktop.
If AutoRun is not enabled on your CD-ROM drive, find the file "ainstall.exe"
on the installation CD and run it.
3. Reboot the computer when prompted.
4. When the installation has completed, the X-keys Macro Maker and Macro Manager
windows automatically pop up. Close these windows.
5. Start Aurora Ingest Server and Aurora Ingest Scheduler.
6. In the Scheduler Tools menu, select Options .
7. Select the X-keys tab.
8. Verify the “Enable X-keys” box is checked and click OK .
You can customize the X-keys to suit your needs.
14 April 2010 Aurora Ingest System Guide 23
Installing Aurora Ingest Hardware