Grass Valley Aurora Ingest v.7.0.0 - Manual (Page 133)

Description Column
The name of the folder where the clip resides in the database. Location
The channel that was selected for the event Channel
The user who scheduled the event. Owner
Any error message describing why the event was not recorded to the server. Error
Message
Crash Recording
You can crash record when you want to record an event immediately.
1. Select the channel where you want to record the event.
2. Enter the name of the clip in the Name dialog box. If the name is not populated
prior to the crash record, a default name will be set according to your setting within
Aurora Ingest Server. The name will automatically increment the reference count
if there's another name that matches it.
3. Select the router source for the recording by selecting from the Source drop-down
list.
4. Select the location for the clip to be recorded into from the Location drop-down
list. If the location is not populated prior to the crash record, the clip will be recorded
into a default folder that had been set within your Aurora Ingest Server setting.
5. If the feature to switch aspect ratio is enabled within your Aurora Ingest - Server
and the feature is supported on your media server, select the aspect ratio that you
need from the drop-down list.
6. Click the Record button .
While the clip is recording, the record button flashes and the clip is displayed
in red.
7. During the recording, you can modify event details by right-clicking on it and
selecting Modify Event . The Modify Event dialog box will be displayed and you
can modify details such as the event description, the end time of the recording or
link the feed to an Aurora Playout placeholder.
You can just click in the Modify event dialog box to browse for placeholders
if you want to link the feed. The Assignment List window will be displayed and
you can select a placeholder that you need.
14 April 2010 Aurora Ingest System Guide 133
Using Aurora Ingest - Scheduler