Grass Valley 8972PX - Manual (Page 70)

70 8972PX — Instruction Manual
Software Updating
LED Reports Link
Select the LED Reports link to open the 8900NET LED Reporting web page.
Normally, every module in the frame will report to the 8900NET module
any Fault, Signal Loss, Reference Loss, or Config Error conditions. These
conditions will be reflected by the status LEDs on the 8900NET module.
Using this web page, any of these conditions can be disabled from being
reported to the 8900NET module for each individual module and other
components (power supplies, fans) in the frame
SNMP Trap Reports Link
Select the SNMP Trap Reports link to open the 8900NET SNMP Reporting
web page. This link will only be present when SNMP Agent software has
been installed on the 8900NET module. This web page allows configura-
tion of which alarms and warnings that are reported to the SNMP manage-
ment software.
Refer to the 8900NET Instruction Manual for complete details on using the
8900NET web pages.
Software Updating
Software updating of the 8972PX modules is done using either an microSD
card or the NetConfig Networking Application PC option. The microSD
card method is recommended for speed of upload but parts required for
this method must be purchased by the customer.
The NetConfig application is available free of charge from the Grass Valley
web site. Updating new software with NetConfig is a slightly longer pro-
cess.
Instructions for using both procedures are given in the 8972PX Release
Notes when updated software updates become available. Check the Grass
Valley web site for update information.
All modular product documentation can be found in PDF format on the
Grass Valley web site at this link:
www.grassvalley.com/docs/modular