Grass Valley 8972PX - Manual (Page 21)

8972PX — Instruction Manual 21
Configuration Summary
Next State Program/Backup Tables
Table 1 through Table 5 are arranged from left to right to with the items
listed below. Abbreviations for the input signals are: Primary (PRI), Sec-
ondary (SEC) and Alternate (ALT).
• Current Program – lists the input currently on the Program Output.
• Current Backup – lists the Backup Candidate that will replace the
current input on the Program Output if it fails.
• Alternate Enabled – indicates Yes when the Alternate input is enabled
for use in Autonomous mode and No when it is not enabled.
• Maintain Primary – indicates Yes if Maintain Primary is enabled as the
Autonomous mode, No if Maintain Stability is enabled, or N/A if the
mode does not matter.
• Primary Status – the status of the Primary input is Good , Fail , or N/A if the
mode does not matter.
• Secondary Status – the status of the Secondary input is Good , Fail , or N/A
if the mode does not matter.
• Alternate Status – the status of the Alternate is Good , Fail , or N/A if the
mode does not matter.
• Action of Program Output/Backup – shows the switch action of the
Program output and the Backup Candidate.
• Next Program/Next Backup Candidate – summarizes what the next
Program output will be and the next Backup Candidate using the input
signal abbreviations.