H3C Technologies H3C SecBlade LB Cards - Manual (Page 65)

57
Config Pri : 100 Running Pri : 100
Preempt Mode : Yes Delay Time : 5
Become Master : 4200ms left
Auth Type : None
Virtual IP : FE80::10
1::10
Master IP : FE80::1
The output shows that in VRRP group 1 LB A is the master, LB B is the backup and packets sent from
Host A to Host B are forwarded by LB A.
When LB A fails, you can still ping LB B successfully on Host A. To view the detailed information
about the VRRP group on LB B, use the display vrrp ipv6 verbose command.
# When LB A fails, display the detailed information about VRRP group 1 on LB B.
[LBB-GigabitEthernet0/1] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface GigabitEthernet0/1
VRID : 1 Adver Timer : 100
Admin Status : Up State : Master
Config Pri : 100 Running Pri : 100
Preempt Mode : Yes Delay Time : 5
Auth Type : None
Virtual IP : FE80::10
1::10
Virtual MAC : 0000-5e00-0201
Master IP : FE80::2
The output shows that when LB A fails, LB B becomes the master, and packets sent from Host A to
Host B are forwarded by LB B.
# After LB A resumes normal operation, use the display vrrp ipv6 verbose command to display the
detailed information about VRRP group 1 on LB A.
[LBA-GigabitEthernet0/1] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface GigabitEthernet0/1
VRID : 1 Adver Timer : 100
Admin Status : Up State : Master
Config Pri : 110 Running Pri : 110
Preempt Mode : Yes Delay Time : 5
Auth Type : None
Virtual IP : FE80::10
1::10
Virtual MAC : 0000-5e00-0201
Master IP : FE80::1