beautypg.com

Configuring device b – H3C Technologies H3C SecBlade LB Cards User Manual

Page 41

background image

33

e.

Select Simple from the Authentication field.

f.

Enter hello in the Key field.

g.

Enter 5 in the Advertise Time field.

h.

Click Display Track Config.

i.

Select GigabitEthernet0/2 from the Interface field, enter 30 in the Reduced Priority field, and
then click Add to add the interface to the list box of tracked interface.

j.

Click Apply.

Figure 18 Configuring VRRP group attributes

Configuring Device B

1.

Configure the IP address of each interface. (Details not shown)

2.

Create VRRP group 1 on GigabitEthernet 0/1 and configure the virtual IP address as
202.38.160.111:

a.

Select High Availability > VRRP from the navigation tree.

b.

Click the

icon corresponding to GigabitEthernet 0/1.

The VRRP group page appears.

c.

Click Add.
The page for creating a VRRP group appears.

d.

Enter 1 in the VRID field and 202.38.160.111 in the Virtual IP field, and click Add to add the
virtual IP address to the Virtual IP Members field.

e.

Click Apply.

This manual is related to the following products: