H3C Technologies H3C SecBlade LB Cards User Manual
Page 141
133
# Create an FTP operation.
[LB] nqa entry admin test1
[LB-nqa-admin-test1] type ftp
# Specify the IP address of the FTP server 10.2.2.2 as the destination IP address.
[LB-nqa-admin-test1-ftp] destination ip 10.2.2.2
# Specify 10.1.1.1 as the source IP address.
[LB-nqa-admin-test1-ftp] source ip 10.1.1.1
# Set the FTP username to admin, and password to systemtest.
[LB-nqa-admin-test1-ftp] username admin
[LB-nqa-admin-test1-ftp] password simple systemtest
# Configure the device to upload file config.txt to the FTP server.
[LB-nqa-admin-test1-ftp] operation put
[LB-nqa-admin-test1-ftp] filename config.txt
# Enable the saving of history records.
[LB-nqa-admin-test1-ftp] history-record enable
[LB-nqa-admin-test1-ftp] quit
# Start the FTP operation.
[LB] nqa schedule admin test1 start-time now lifetime forever
# Stop the FTP operation after a period of time.
[LB] undo nqa schedule admin test1
# Display the results of the FTP operation.
[LB] display nqa result admin test1
NQA entry (admin admin, tag test1) test results:
Destination IP address: 10.2.2.2
Send operation times: 1 Receive response times: 1
Min/Max/Average round trip time: 173/173/173
Square-Sum of round trip time: 29929
Last succeeded probe time: 2011-11-22 10:07:28.6
Extended results:
Packet loss in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
# Display the history records of the FTP operation.
[LB] display nqa history admin test1
NQA entry (admin admin, tag test1) history record(s):
Index Response Status Time
1 173 Succeeded 2011-11-22 10:07:28.6
The output shows that LB uses 173 milliseconds to upload a file to the FTP server.