H3C Technologies H3C SecBlade LB Cards User Manual
Page 164
156
InFlow(Octets) : 0
OutFlow(Octets) : 0
BandWidth(b/s) : 10000
UsedBandWidth(b/s) : 0
# Display the state of the active and standby interfaces.
[LB-GigabitEthernet0/2] display standby state
Interface Interfacestate Standbystate Standbyflag Pri Loadstate
GigabitEthernet0/2 UP MUP MUD TO-HYPNOTIZE
GigabitEthernet0/1 STANDBY STANDBY BU 30
GigabitEthernet0/3 STANDBY STANDBY BU 20
Backup-flag meaning:
M---MAIN B---BACKUP V---MOVED U---USED
D---LOAD P---PULLED
# When the data traffic on the active interface GigabitEthernet 0/2 exceeds 8000 kbps (that is,
10000 kbps × 80%), standby interface GigabitEthernet 0/1 with a higher priority is enabled first.
Then you can view the state of the active and standby interfaces.
[LB-GigabitEthernet0/2] display standby state
Interface Interfacestate Standbystate Standbyflag Pri Loadstate
GigabitEthernet0/2 UP MUP MUD
GigabitEthernet0/1 UP UP BU 30
GigabitEthernet0/3 STANDBY STANDBY BU 20
Backup-flag meaning:
M---MAIN B---BACKUP V---MOVED U---USED
D---LOAD P---PULLED