Configuring device b – H3C Technologies H3C SecBlade LB Cards User Manual
Page 50
42
c.
Click Apply.
Figure 25 Creating VRRP group 2
4.
Set the priority of Device A in VRRP group 1 to 110:
a.
On the VRRP group page of GigabitEthernet 0/1, click the
icon corresponding to VRRP
group 1.
b.
Enter 110 in the Priority field.
c.
Click Apply.
Figure 26 Setting the priority of Device A in VRRP group 1
Configuring Device B
The Web interfaces for configuring Device B are similar to those when you configure Device A. The
figures are omitted.
1.
Configure the IP address of each interface. (Details not shown.)
2.
Create VRRP group 1 on GigabitEthernet 0/1 and configure the virtual IP address as
202.38.160.111:
a.
Select High Availability > VRRP from the navigation tree.
b.
Click the
icon corresponding to GigabitEthernet 0/1.
The VRRP group page appears.
c.
Click Add.