H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 65)

56
Task Remarks
Configuring the mode a port uses to recognize/send
MSTP packets
Optional
Enabling the output of port state transition information Optional
Enabling the spanning tree feature Required
Configuring the
leaf nodes
Setting the spanning tree mode
Optional
By default, the device works
in MSTP mode.
Configuring an MST region Required
Configuring the device priority Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring edge ports Optional
Configuring path costs of ports Optional
Configuring the port priority Optional
Configuring the port link type Optional
Configuring the mode a port uses to recognize/send
MSTP packets
Optional
Enabling the output of port state transition information Optional
Enabling the spanning tree feature Required
Performing mCheck Optional
Configuring the VLAN Ignore feature Optional
Configuring Digest Snooping Optional
Configuring No Agreement Check Optional
Configuring protection functions Optional