H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 140
131
Figure 40 Ethernet II-encapsulated LLDPDU format
The fields in the Ethernet II-encapsulated LLDPDU are described in
.
Table 20 Fields in an Ethernet II-encapsulated LLDPDU
Field Description
Destination MAC address
The MAC address to which the LLDPDU is advertised. It is fixed to
0x0180-C200-000E, a multicast MAC address.
Source MAC address
The MAC address of the sending port. If the port does not have a MAC
address, the MAC address of the sending bridge is used.
Type
The Ethernet type for the upper layer protocol. It is 0x88CC for LLDP.
Data LLDPDU
FCS
Frame check sequence, a 32-bit CRC value used to determine the validity of
the received Ethernet frame
2.
SNAP-encapsulated LLDPDU format
Figure 41 SNAP-encapsulated LLDPDU format
The fields in the SNAP-encapsulated LLDPDU are described in
Table 21 Fields in a SNAP-encapsulated LLDPDU
Field Description
Destination MAC address
The MAC address to which the LLDPDU is advertised. It is fixed at
0x0180-C200-000E, a multicast MAC address.
Data = LLDPU
(1500 bytes)
0
Destination MAC address
Source MAC address
Type
15
31
FCS