Configuration consideration, Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 108

Figure 29 Network diagram for MAC-based VLAN configuration

Configuration consideration

•

Create VLANs 100 and 200.

•

Configure the uplink ports of Device A and Device C as trunk ports, and assign them to VLANs 100
and 200.

•

Associate the MAC address of Laptop 1 with VLAN 100, and the MAC address of Laptop 2 with
VLAN 200.

Configuration procedure

Configuration on Device A

# Create VLANs 100 and 200.

system-view

[DeviceA] vlan 100

[DeviceA-vlan100] quit

[DeviceA] vlan 200

[DeviceA-vlan200] quit

# Associate the MAC address of Laptop 1 with VLAN 100, and the MAC address of Laptop 2 with VLAN
200.

[DeviceA] mac-vlan mac-address 000d-88f8-4e71 vlan 100

[DeviceA] mac-vlan mac-address 0014-222c-aa69 vlan 200

# Configure Laptop 1 and Laptop 2 to access the network through GigabitEthernet 1/0/1: Configure
GigabitEthernet 1/0/1 as a hybrid port that sends packets of VLANs 100 and 200 untagged, and

enable the MAC-based VLAN feature on it.

[DeviceA] interface gigabitethernet 1/0/1

[DeviceA-GigabitEthernet1/0/1] port link-type hybrid

[DeviceA-GigabitEthernet1/0/1] port hybrid vlan 100 200 untagged

Please wait... Done.

Device A

Device C

Device B

Server1

IP: 1.1.1.1/24

Server2

IP: 1.1.2.1/24

GE1/0/1

Laptop1

IP: 1.1.1.2/24

MAC: 000d-88f8-4e71

Laptop2

IP: 1.1.2.2/24

MAC: 0014-222c-aa69

VLAN 100

VLAN 200

GE1/0/2

GE1/0/3

GE1/0/4

GE1/0/14

GE1/0/13

VLAN 100

VLAN 200