H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 106)

97
To do... Use the command... Remarks
Associate a specific MAC
address with a VLAN
mac-vlan mac-address mac-address
[ mask mac-mask ] vlan vlan-id
[ priority priority ]
Required
Enter
interface
view or port
group view
Enter Ethernet
interface view interface interface-type
interface-number Required
Use either command.
• The configuration made in
Ethernet interface view applies
only to the port.
• The configuration made in port
group view applies to all ports in
the port group.
Enter port
group view
port-group manual port-group-name
Configure the link type of the
ports as hybrid
port link-type hybrid
Required
By default, all ports are access ports.
Configure the hybrid ports to
permit packets from specific
MAC-based VLANs to pass
through
port hybrid vlan vlan-id-list { tagged
| untagged }
Required
By default, a hybrid port only permits
the packets from VLAN 1 to pass
through.
Enable the MAC-based VLAN
feature
mac-vlan enable
Required
Disabled by default.
Follow these steps to configure dynamic MAC-based VLAN assignment:
To do... Use the command... Remarks
Enter system view system-view —
Associate MAC addresses
with a VLAN mac-vlan mac-address mac-address
vlan vlan-id [ priority priority ]
Required
Enter
interface
view or
port
group
view
Enter Ethernet
interface view interface interface-type
interface-number Required
Use either command.
• The configuration made in
Ethernet interface view applies
only to the port.
• The configuration made in port
group view applies to all ports in
the port group.
Enter port group
view
port-group manual port-group-name
Configure the link type of the
port as hybrid
port link-type hybrid
Required
By default, all ports are access ports.
Enable the MAC-based VLAN
feature
mac-vlan enable
Required
Disabled by default.
Enable dynamic MAC-based
VLAN assignment
mac-vlan trigger enable
Required
By default, dynamic MAC-based
VLAN assignment is disabled.