H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 43)

34
Displaying and maintaining Ethernet link
aggregation
To do... Use the command... Remarks
Display information for an
aggregate interface
display interface bridge-aggregation [ brief
[ down ] ] [ | { begin | exclude | include }
regular-expression ]
display interface bridge-aggregation
interface-number [ brief ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the local system ID
display lacp system-id [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the global
link-aggregation load sharing
criteria
display link-aggregation load-sharing mode [ |
{ begin | exclude | include } regular-expression ] Available in any view
Display detailed link aggregation
information for link aggregation
member ports
display link-aggregation member-port
[ interface-list ] [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display summary information
about all aggregation groups display link-aggregation summary [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display detailed information about
a specific or all aggregation
groups display link-aggregation verbose
[ bridge-aggregation [ interface-number ] ] [ |
{ begin | exclude | include } regular-expression ]
Available in any view
Clear statistics for a specific or all
aggregate interfaces reset counters interface [ bridge-aggregation
[ interface-number ] ] Available in user
view
Ethernet link aggregation configuration examples
NOTE:
In an aggregation group, only ports that have the same port attributes and class-two configurations (see
“
Configuration classes “) as the reference port (see “ Reference port “) can operate as Selected ports. Make
sure that all member ports have the same port attributes and class-two configurations as the reference
port. The other settings only need to be configured on the aggregate interface, not on the member ports.
Layer 2 static aggregation configuration example
Network requirements
As shown in Figure 7 :
• Device A and Device B are connected through their respective Layer 2 Ethernet interfaces
GigabitEthernet 1/0/1 through GigabitEthernet 1/0/3.