beautypg.com

Mac-based vlan configuration, Introduction to mac-based vlan, Static mac-based vlan assignment – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 103

background image

94

VLAN ID: 100

VLAN Type: static

Route Interface: not configured

Description: VLAN 0100

Name: VLAN 0100

Tagged Ports:

GigabitEthernet1/0/3

Untagged Ports:

GigabitEthernet1/0/1

[DeviceA-GigabitEthernet1/0/3] display vlan 200

VLAN ID: 200

VLAN Type: static

Route Interface: not configured

Description: VLAN 0200

Name: VLAN 0200

Tagged Ports:

GigabitEthernet1/0/3

Untagged Ports:

GigabitEthernet1/0/2

MAC-based VLAN configuration

Introduction to MAC-based VLAN

The MAC-based VLAN feature assigns hosts to a VLAN based on their MAC addresses. This feature is

usually used in conjunction with security technologies such as 802.1X to provide secure, flexible network
access for terminal devices.

Static MAC-based VLAN assignment

Static MAC-based VLAN assignment applies to networks containing a small number of VLAN users. In

such a network, you can create a MAC address-to-VLAN map containing multiple MAC

address-to-VLAN entries on a port, enable the MAC-based VLAN feature on the port, and assign the port
to MAC-based VLANs.
With static MAC-based VLAN assignment configured on a port, the device processes received frames by

using the following guidelines:

When the port receives an untagged frame, the device looks up the MAC address-to-VLAN map
based on the source MAC address of the frame for a match.

{

The device first performs a fuzzy match. In the fuzzy match, the device searches the MAC
address-to-VLAN entries whose masks are not all-Fs and performs a logical AND operation on
the source MAC address and each mask. If the result of an AND operation matches the

corresponding MAC address, the device tags the frame with the corresponding VLAN ID.

{

If the fuzzy match fails, the device performs an exact match. In the exact match, the device
searches the MAC address-to-VLAN entries whose masks are all-Fs. If the MAC address of a

MAC address-to-VLAN entry matches the source MAC address of the untagged frame, the

device tags the frame with the corresponding VLAN ID.

{

If no match is found, the device assigns a VLAN to the frame by using other criteria, such as IP
subnet or protocol, and forwards the frame.