H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 90

[Router-Ethernet1/1] quit

[Router] interface ethernet 1/2

[Router-Ethernet1/2] pim dm

[Router-Ethernet1/2] igmp enable

[Router-Ethernet1/2] quit

Configure AC:
# Enable IGMP snooping globally.

system-view

[AC] igmp-snooping

[AC-igmp-snooping] quit

# Create VLAN 10, assign GigabitEthernet 1/0/1 to VLAN 10, and enable IGMP snooping in this

VLAN.

[AC] vlan 10

[AC-vlan10] port GigabitEthernet1/0/1

[AC-vlan10] igmp-snooping enable

[AC-vlan10] quit

# Configure GigabitEthernet 1/0/2 as a trunk port, and configure it to allow packets from VLAN
2, VLAN 3, and VLAN 10 to pass.

[AC] interface GigabitEthernet 1/0/2

[AC-GigabitEthernet1/0/2] port link-type trunk

[AC-GigabitEthernet1/0/2] port trunk permit vlan 2 3 10

[AC-GigabitEthernet1/0/2] quit

# Configure VLAN 2, VLAN 3, and WLAN-ESS 1 on the AC. Configure WLAN-ESS 1 as a hybrid

port with VLAN 10 as the default VLAN, and configure the port to permit packets from VLAN 2,

VLAN 3, and VLAN 10 to pass and untag the packets.

[AC] vlan 2

[AC-vlan2] vlan 3

[AC-vlan3] quit

[AC] interface WLAN-ESS 1

[AC-WLAN-ESS1] port link-type hybrid

[AC-WLAN-ESS1] port hybrid pvid vlan 10

[AC-WLAN-ESS1] port hybrid vlan 2 3 10 untagged

[AC-WLAN-ESS1] mac-vlan enable

# Configure the MAC-based VLAN feature so that Client A and Client B belong to VLAN 2 and

VLAN 3 respectively.

[AC] mac-vlan mac-address 6A-74-B3 vlan 2

[AC] mac-vlan mac-address A6-5B-89 vlan 3

# Enable IGMP snooping in VLAN 2 and VLAN 3.

[AC] vlan 2

[AC-vlan2] igmp-snooping enable

[AC-vlan2] quit

[AC] vlan 3

[AC-vlan3] igmp-snooping enable

[AC-vlan3] quit

# Configure VLAN 10 as a multicast VLAN.

[AC] multicast-vlan 10

# Assign WLAN-ESS 1 to VLAN 10.

This manual is related to the following products: